Features
1, Rich colors. The blades could be white, orange, yellow, blue, green, mixed, and any other color.2, Various voltages. 3 phase AC output, suitable for charging 12V, 24V, 48V batteries.
3, One-piece Blade design ensures higher rotational stability, low noise.
4, Coreless generator means lower start torque, lower start wind speed, longer service life.
5, RPM limit protection. The RPM is kept under 300 regardless of high wind speed which prevents –the controller from over-load.
6, Easy installation. Full set of fasteners and installation tools are attached in the package.
7, Long service life. The turbine could work 10~15 years under normal natural environments
Specifications
| item | FS-200 | ||||
| Started wind speed | 1.3 m/s | ||||
| Cut-in wind speed | 2.5 m/s | ||||
| Rated Wind speed | 11 m/s | ||||
| Rated voltage (AC) | 12/24V | ||||
| Rated power(W) | 200W | ||||
| Max power(W) | 210W | ||||
| Wheel diameter(m) | 0.52 | ||||
| weight | <21Kg | ||||
| Blades height(m) | 1.05m | ||||
| Safe wind speed | ≤40m/s | ||||
| Blades quantity | 2 | ||||
| Blade material | glass/basalt | ||||
| Generator | Three phase permanent magnet suspension motor | ||||
| Control System | Electromagnet | ||||
| Generator protection grade | IP54 | ||||
| Work environment temperature | -25~+45ºC, | ||||
| Altitude: | ≤4500m | ||||
| Overspeed protection | Electromagnetic brake | ||||
| Overload protection | Electromagnetic brake and the unloading unit | ||||
Product Description
1.low start up speed; high wind energy utilization; beautiful appearance; low vibration
2.Human friendly design, easy installation, maintenance and repair.
3.precise injection molding blades together with the optimized design of aerodynamic contour and structure, the blades have such advantages: high utilization of wind energy which contributes to the annual energy output.
4.the generators, adopting patented permanent magnet rotor alternator，with a special kind of stator design, efficiently decrease resistance torque.Meanwhile, it makes the wind turbines match the generators quite well and increase its reliability
Tower and Accessories Production
1.its flange base is suggested to be installed on a iron barrel-type tower whose OD is 48mm and thickness is 4.5mm.
2,Iron pipe length is suggested to choose based on local wind scales and geographical environment.
3, tower accessories, including (1)the upper tower. (2) The cable group. (3) Tightening line device. (4) Anchor. (5) Line hook. (6) tower base. (7) Anti-tarnish, anticorrosive, coating materials.
4. The making and size of the upper tower is shown in figure 2. Its requirement: solid welding; no leak at the weld zone; the earth lug must be welded 20cm away from the ground(clearly visible). It will be connected to the lightening grounding device.
5. Please refer to the national standard, or the European standard, or American standard or figure 1 in this manual to arrange grounding device.
6. Tower and its accessories can be provided individually according to your requirements
The Wind Turbine Installation Steps
1.its flange base is suggested to be installed on a iron barrel-type tower whose OD is 48mm and thickness is 4.5mm.
2,Iron pipe length is suggested to choose based on local wind scales and geographical environment.
3, tower accessories, including (1)the upper tower. (2) The cable group. (3) Tightening line device. (4) Anchor. (5) Line hook. (6) tower base. (7) Anti-tarnish, anticorrosive, coating materials.
4. The making and size of the upper tower is shown in figure 2. Its requirement: solid welding; no leak at the weld zone; the earth lug must be welded 20cm away from the ground(clearly visible). It will be connected to the lightening grounding device.
5. Please refer to the national standard, or the European standard, or American standard or figure 1 in this manual to arrange grounding device.
6. Tower and its accessories can be provided individually according to your requirements
