High Quality for Helical Wind Turbine Design - micro wind turbine with LED Light vertical wind generator with 3 blades for new energy classes – Flyt Detail:
Features
| Material | Plastic+Electrical components |
| Color | Pink or White |
| Output voltage | DC 0.01v – 5.5v |
| Output current | 0.01 – 100mA |
| Rated speed | 100 – 6000 rev/min |
Brand New and high quality.
Mini design, great demonstration effect, practical and durable.
It is a very good demonstration of wind power teaching tools.
Can also be used for making a variety of small technology production, model making.
Packing details
1 X Motor with base / 1 X LED / 1 X Vertical Blade
Remind
Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.
Please understand that colors may exist chromatic aberration as the different placement of pictures.
Daily maintenance
Although the overall wind turbine system is highly reliable, but it must be inspected and maintained regularly to ensure normal operation.
Screw inspection
Check the screws on flange, yaw shaft and tower .Re-tighten them, at least one time every year.
The maintenance of battery
Maintenance should be conducted at regular intervals throughout the year to ensure proper charging and discharging of battery. If there’s no wind for a long time, you should charge the battery temporarily with state grid.
TIPS
Do not stand near the turbine during periods of high wind speeds. It is recommended that you lay down the tower or bind blades to the tower to prevent them from spinning in the event of approaching extremely rough weather to avoid accidents.
Product detail pictures:
Related Product Guide:
Dedicated to strict top quality command and considerate purchaser support, our experienced staff customers are always available to discuss your necessities and be certain full client gratification for High Quality for Helical Wind Turbine Design - micro wind turbine with LED Light vertical wind generator with 3 blades for new energy classes – Flyt, The product will supply to all over the world, such as: Accra, Chile, America, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Belle from Dubai - 2017.06.19 13:51
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Rosalind from Frankfurt - 2017.08.15 12:36