Hot Selling for Types Of Vertical Axis Wind Turbine - China factory vertical axis 1000W 1kw 48v 96v 120V wind turbine generator complete system – Flyt

Features

1, Curved blade design, utilizes wind resource effectively and obtains a higher power generation.
2, Coreless generator, Horizontal rotation and aircraft wing design reduce the noise to an unper-ceivable level in natural environment.
3, Wind resistance. Horizontal rotation and triangular double fulcrum design make it only bear a- small wind pressure even in strong wind.
4, Rotation radius. smaller rotation radius than other types of wind turbines, space is saved while efficiency improved.
5, Effective wind speed range. special control principle expended the wind speed to 2.5 ~ 25m/s, utilizes wind resource effectively and obtains a higher power generation.

Specifications

Preparation

3-1 Open the package, make sure no components has been missed, everything is in good condition. Make sure your system is designed rationally, materials are good quality, installers/workers have sufficient electrical acknowledge.

3-2 Please weld the DN25 flange(in the package) to an iron tube to make a standing pole. Plant the standing pole on the roof , the hill or an open ground with good wind condition.

3-3 Connect any two of the generator’s three wires to a voltage meter, rotate the generator to see whether the voltage come out. Rotate the generator faster to see whether the voltage goes higher. Then short-circuit the 3 wires before installation, make sure the blades would not be rotated by the wind.

3-4 Please don’t install the turbine in bad weather, such as rain, heavy wind, sand-storm, etc, which may damage the turbine or hurt the installers.

3-5 Please first connect the battery/load to the controller, second connect the turbine to the controller, third relieve the short-circuit status, let the turbine rotates freely.

3-6 Check whether is any dithering, vibration, swing or noise while working, try to solve it or ask for advice from the supplier.